Lancer products

Mark Powers carries a broad selection of Lancer equipment as well as a full line of Lancer service equipment and parts, including dispensers, ice machines, carbonators, accessories and valves.

Lancer is a leading manufacturer and marketer of beverage dispensing systems serving customers throughout the world. Headquartered in San Antonio, Texas, Lancer maintains sales and/or manufacturing facilities in United States, Mexico, Australia, Belgium, and New Zealand. Lancer is a subsidiary of Hoshizaki Electric Co. Ltd., one of the world's largest suppliers of commercial kitchen equipment.

Today, Lancer is a vertically integrated manufacturer, employing approximately 1,500 associates in the United States, Mexico, Australia, New Zealand, the Far East, and Europe. Lancer manufactures a complete range of mechanically cooled and ice cooled soft drink dispensers, frozen beverage dispensers, dispensing valves, carbonators, beer dispensing equipment and an extensive line of beverage dispensing parts and accessories.

Model Number	Product Features	Product Specifications
22" - FS22	Illuminated interchangeable merchandiser Field configurable Lancer “Air Mix” dispense module Multiple ice fill options Standard valve key lock Fits in current 22” IBD footprint Lancer “Lite Touch” user interface panel New ice chute design Cold carbonation Large capacity removable drip tray and cup rest	30 1/2 in (775 mm) deep X 22 in (558 mm) wide X 39 5/8 in (1006 mm) high 120VAC/60Hz, 15A or 230VAC/50Hz, 7.5A Space Required - 22 in wide X 30 1/2 in deep Weight - 280 lbs W/O ice, 480 lbs with ice, 310 lbs total ship weight Ice Capacity - 200 lbs total, 175 lbs dispensable Soda inlets: 3/8 inch barb, Syrup inlets: 3/8 inch barb Water - Filtered water 50 psi min 2 Lancer “Air Mix” Modules, Bag-in-a-box (BIB), Valves Lancer LFCV, Key lock switch for valves, Front connection for products, Access to floor drain suggested, Lancer Parts warranty
30" - FS30	Merging multi-flavor technology and cold carbonation to current IBD functionality Cold-carbonated unit, cast-in carbonator is standard - Units include high capacity carbonator pump and motor Lancer "Air Mix" Module dispense flow rates up to 16 major fountain brands - Configuration can be as few as 8 flavors - New configurations are easily field upgraded Four multi-flavor "Air Mix" Modules - each nozzle capable of dispensing 4 major brands (as few as 2) and 3 bonus flavors. All nozels carbonated capable. Center nozzles 2 and 3 can be configured to support plain water drinks (e.g. nozzle #2 can run a carbonated drink and a plain water drink.) Electronic plain/soda water conversion on 8 products. Capable of up to 12 ambient "bonus" flavors- Configuration(s) 1 to 3 flavors on 4 nozzles, easily field upgraded User interface module - Lancer soft sense module - Brand identification using back lit pattern configuration, active pattern available State of the art electronics with easy access to configuration menus Adjustable ice dispensing rate, low ice sensing visual indicator Ice Link compatible Compatible with a standard 30" icemaker Can be manually filled New ice chute design reduces ice in flight and directs ice to center of cup Fits in current 30" IBD footprint Automatic agitation with software selectable frequency and duration	30 in (762 mm) wide X 30.5 in (775 mm) deep X 39.625 in (1006 mm) high 115 VAC/60Hz Total ice capacity 290 lbs (102 kg) Lancer "Air Mix" Modules, Modules 2&3 are plain water capable Soda and syrup fittings are 3/8 in barb, Bag-in-a-box (BIB) Water - Filtered water, 40 psi minimum, Access to floor drain suggested Service space required - Left side: 1 in (25 mm), Right side: 1 in (25 mm), Back: 1 in (25 mm), Top: 6 in (152 mm) Optional legs: 4 in (102 mm), Valves available - Lancer LFCV, Key lock switch for dispensing valves, Front connection for products Weight - Operating: 620lbs (281 kg), Counter (w/o ice): 320 lbs (145 kg), Shipping: 356 lbs (161 kg) Lancer Parts warranty
44" - FS44	Illuminated interchangeable merchandiser Field configurable Lancer "Air Mix" dispense module Multiple ice fill options Standard valve key lock Fits in current 44" IBD footprint Lancer "Lite Touch" user interface panel New ice chute design Cold carbonation Large capacity removable drip tray and cup rest	33 in (838 mm) deep X 46 5/8 in (1169 mm) wide X 63 5/8 in (1601 mm) high 120VAC/60Hz, 15A (times 2) Space Required - 46 1/2 in wide X 33 in deep Weight - 700 lbs W/O ice, 1120 lbs with ice (times 2), 310 lbs ship weight (times 2) + Kit Ice Capacity - 400 lbs total (200 lbs each), 350 lbs total dispensable (175 each) Soda inlets: 3/8 inch barb, Syrup inlets: 3/8 inch barb Water - Filtered water 50 psi min 4 Lancer "Air Mix" Modules, Bag-in-a-box (BIB), Valves Lancer LFCV, Key lock switch for valves, Front connection for products, Access to floor drain suggested

Model Number	Product Features	Product Specifications
Delta III	Shipped complete with installation kit in box Built-In Cold Carbonator Integral Syrup Pumps (optional) Condition D Approved Optional Non-Carb Valve (no parts required) Available with LEV or Volumetric Valve Technology 100% CFC free Refrigerant and Insulation Optional Leg Kit Available	115V, 60Hz, 230V, 50Hz or 220V, 60Hz Compressor: 1/3 hp Tecumseh Refrigerant: R-134a (100% CFC-Free) Ice Bank Control: Lancer Electronic Liquid Level Control: Lancer Electronic Carbonator Motor: 1/4 hp Rockwell Carbonator Tank: 4" (10.16cm) Dia x 10.7" (27.18cm) High, 135 cubic inches (2.21 liters) volume Water Pump: Lancer 100 GPH (379 liters/hr) Insulation: 1 1/4" (32mm) thick Polyurethane Foam (100% CFC-Free) 3/8" (9.5mm) Male Flare water inlet, 1/4" (6.4mm) Barb Syrup Inlet
1500 HI	Standard-Capacity-1/3 hp, 30 lbs Ice Bank, Flooded Standard Performance manifold Stainless Steel Cabinet, Water bath, Product Lines and Splash Plate; removable Refrigeration Deck Insulation 100% Non-CFC-Structural Foam Flex Manifold Configuration for Multiple Non-Carbonated Drinks Available with 5 or 6 Post-Mix Dispensing Valves 100% Non-CFC, R134A Refrigerant Optional Lighted Marquee Kit and Leg Kit	Weight: Shipping approximately 150 lbs ( 68.04 kg), Counter with water approximately 220 lbs ( 99.79 kg) 115 V, 60 Hz, 6.5 A or 230 V, 50 Hz, 4.4 A UL grounded line, cord, and plug, Compressor: 1/3 hp, Agitator Motor: 25 W, Ice Bank Control: Ranco 018-113-00, Pre-set, Transformer: 24 VAC Secondary Stainless steel inlet labeled, 1/4" barb syrup, 3/8" barb soda Valves available: LEV standard PN 85-1595A-100 5 LEV (Manifold configuration:3, 2 flex with 4 and 5 optional water options) PN 85-1596A-100 6LEV (Manifold configuration:3, 3flex with 4,5 and 6optional water options)
1500 STD	Standard-Capacity-1/3 hp, 30 lbs Ice Bank, Flooded Standard Performance manifold Stainless Steel Cabinet, Water bath, Product Lines and Splash Plate; removable Refrigeration Deck Insulation 100% Non-CFC-Structural Foam Flex Manifold Configuration for Multiple Non-Carbonated Drinks Available with 5 or 6 Post-Mix Dispensing Valves 100% Non-CFC, R134A Refrigerant Optional Lighted Marquee Kit and Leg Kit	Weight: Shipping approximately 150 lbs ( 68.04 kg), Counter with water approximately 220 lbs ( 99.79 kg) 115 V, 60 Hz, 6.5 A or 230 V, 50 Hz, 4.4 A UL grounded line, cord, and plug, Compressor: 1/3 hp, Agitator Motor: 25 W, Ice Bank Control: Ranco 018-113-00, Pre-set, Transformer: 24 VAC Secondary Stainless steel inlet labeled, 1/4" barb syrup, 3/8" barb soda Valves available: LEV standard PN 85-1595A-100 5 LEV (Manifold configuration:3, 2 flex with 4 and 5 optional water options) PN 85-1596A-100 6LEV (Manifold configuration:3, 3flex with 4,5 and 6optional water options)
2500	High Performance 3/4 hp, 55lbs Ice Bank, Flooded High Performance manifold Stainless Steel Cabinet, Water bath, Product Lines and Splash Plate; removable Refrigeration Deck Insulation 100% Non-CFC-Structural Foam Flex Manifold Configuration for Multiple Non-Carbonated Drinks Available with 6 or 8Post-Mix Dispensing Valves 100% Non-CFC, R134A Refrigerant Optional Lighted Marquee Kit and Leg Kit	Weight: Shipping approximately 300 lbs ( 136.1 kg), Counter with water approximately 387 lbs ( 175.5 kg) 115 V, 60 Hz, 6.5 A, 230 V, 50 Hz or 240 V, 60 Hz, 1 phase, 7.5 A UL grounded line, cord, and plug, Compressor: 3/4 hp, Agitator Motor: 25 W, Ice Bank Control: Lancer Electric Ice Bank Control, Transformer: Basler 24 VAC Secondary Stainless steel inlet labeled, 3/8" barb syrup, 3/8" barb soda Water Bath Capacity: 20.9 gallons Valves available: LEV standard PN 85-1595A-100 6 LEV«(Manifold configuration:3, 2, 1 with plain water option on valves 3, 4, and 5) PN 85-1596A-100 8 LEV«(Manifold configuration:3, 1, 1, 3 and plain water option on valve 4 and 5)
500	Available with 2 3, or 4 Post-Mix Dispensing Valves 1/4 hp, 17lb Ice Bank, Flooded Manifold Occupies a small area of counter space, only 10,3/8" wide. Compare with conventional dispenser Insulation-Non-CFC Structural Foam Stainless steel cabinet water bath, product lines and drip tray assembly Removable refrigeration deck. All installation from front of unit. Leg kit included 100% Non-CFC, R134A Refrigerant Optional Lighted Front Marquee Kit	Weight: Shipping approximately 108 lbs ( 49kg), Counter with water approximately 125 lbs (56.7 kg) 115 V, 60 Hz, 6.5A, 230 V, 50 Hz or 220 V, 60 Hz, 1 phase, 3.3A UL grounded line, cord, and plug, Compressor: 1/4 hp, Agitator Motor: 15W, Condenser Fan Motor: 4 W, Ice Bank Control: Lancer Electronic Ice Bank Control, Transformer: 24 VAC Fittings: Stainless steel inlet labeled, 3/8" barb syrup, 3/8" barb soda Water bath capacity: 20 gallons
8000	High-capacity - 3/4 hp, 55 lb ice bank, flooded high performance manifold Build-in cold carbonation Stainless steel cabinet, water bath, product lines, and drip tray assembly; removable refrigeration deck Insulation is CFC-free structural foam Flex manifold configuration for multiple non-carbonated drinks Available with 6 or 8 post-mix dispensing valves CFC-free, R134A refrigerant Removable ice bank probe Optional Lighted marquee kit Optional air filter	24 in (610 mm) wide X 28 5/8 (727 mm) deep X 30 5/8 (778 mm) high 115V, 60Hz, 16A, 230V, 50Hz or 220V, 60Hz, 7A UL grounded cord and plug Weight: Shipping 320 lbs (145 kg), Counter with water 491 lbs (223 kg), Ice Bank 55 lbs (25 kg) Syrup and water: 3/8" barb, Stainless Steel, labeled inlet Compressor 3/4 hp, Agitator: 25 W, Condenser fan: 35 W, Ice Bank Control: Lancer Electronic Ice Bank Control, Liquid Level Control: Lancer Electronic, Transformer 24VAC secondary Valves Available LEV Water Bath Capacity 20 gallons Refrigeration Capacity When supplied with 75 F (24 C) incoming water, at 75 F (24 C), the unit will dispense an unlimited number of twelve ounce drinks at a temperature of 40 F (4.5 C) or below, drawn at the rate of 2 drinks per minute. Full recovery rate of ice bank requires 2.5 hours.
9400 Pre-Mix	1/3 hp, 27-30lb Ice Bank Stainless Steel Cabinet, Water Bath, Product Lines and Splash Plate Insulation 100% Non-CFC-Structural Foam Removable refrigeration deck. All installation from front of unit Designed to operate in ambient temperatures to 105 F(40 C)	Weight: Shipping approximately 170 lbs ( 77.11 kg), Counter with water approximately 220 lbs ( 99.8 kg) 115 V, 60 Hz, 9.0 A or 220 V, 50 Hz, 1 phase, 4.5 A UL grounded line, cord, and plug, Compressor: 1/3 hp, Agitator Motor: 9 W, Ice Bank Control: Electronic, Transformer: Basler 24 VAC Secondary Stainless steel inlet labeled 1/4" barb Valves available: 4, 5, or 6 Becker valves INSULATION: 1 1/4" thick structural foam insulation on all sides of the water bath for greater insulating factor. Ideal for high temperature, high humidity locations. Foam insulation is CFC free. REFRIGERATION CAPACITY: When supplied with a 75 F(24 C) incoming product (pre-mix), the unit will dispense 490 twelve ounce drinks at a temperature of 40 F(4.5 C) or below, drawn at the rate of 2 drinks per minute. Full recovery of the ice bank requires about 2:45 hours. Ice bank weight: 27-30lbs.

Model Number	Product Features	Product Specifications
4400 22"	22" Wide Model Illuminated Interchangeable Graphics Front Serviceability Variable Ice Agitation is Standard Push and Lever Ice Dispensing Versatility Light Indicator for Low Ice Standard All Stainless Steel Construction, Interior and Exterior Electronic Printed Circuit Board Controls all Functions	Weight: Shipping approximately 170 lbs. (77 kg.), Counter without ice 142 lbs. (64 kg.) Total Ice Capacity: 180 lbs. (82 kg.) 115 volt electrical system (230 volt 50/60 Hz available)
4400 30"	30" Wide Model Illuminated Interchangeable Graphics Front Serviceability Variable Ice Agitation is Standard Push and Lever Ice Dispensing Versatility Light Indicator for Low Ice Standard All Stainless Steel Construction, Interior and Exterior Electronic Printed Circuit Board Controls all Functions	Weight: Shipping approximately 200 lbs. (90 kg.), Counter without ice 175 lbs. (79 kg.) Total Ice Capacity: 250 lbs. (113 kg.) 115 volt electrical system (230 volt 50/60 Hz available)
4500 22" 4500 22" Coca-Cola	22" Wide (Counter Space Saver) Illuminated Interchangeable Graphics Front serviceability Variable ice agitation is standard Adjustable ice dispense rate Push and Lever ice dispensing versatility Stainless steel construction Multiple non-carbonated drink capabilities Low ice sensing is standard with visual indicator Smooth and even ice dispensing flow 180 lbs. ice capacity with 150 lbs dispensable	Weight : Shipping approximately 255 lbs (116 kg), Counter without ice 225 lbs (102 kg) Ice capacity : Dispensable 150 lbs (68 kg), Total 180 lbs (82 kg) 115V electrical system (230V 50/60 Hz available) Key lock switch for dispensing valves 3-2-1 Flex Manifold Configuration Soda & Syrup Fittings: 3/8" male barb Unit can supply drinks under 40 F at rated draw performance continuously as long as ice is kept on cold plate
4500 30" 4500 30" Coca-Cola	30" Wide (8 or 10 valve) Unit Illuminated Interchangeable Graphics Front serviceability Variable ice agitation is standard Adjustable ice dispense rate kit included in installation kit Push and Lever ice dispensing versatility Stainless steel construction Multiple non-carbonated drink capabilities Low ice sensing is standard with visual indicator Smooth and even ice dispensing flow 250 lbs. ice capacity with 200 lbs dispensable	Weight: Shipping approximately 305 lbs (138 kg), Counter without ice 275 lbs (125 kg) Total ice capacity: 250 lbs (113 kg) 115V electrical system (230V 50/60 Hz available) Key lock switch for dispensing valves 3-1-1-3 Flex Manifold Configuration (8 Valve) 3-1-2-1-3 Flex Manifold Configuration (10 Valve) Soda & Syrup Fittings: 3/8" male barb Unit can supply drinks under 40 F at rated draw performance continuously as long as ice is kept on cold plate.
4500 44" 4500 44" Coca-Cola	44" Wide (12 Valve) Unit Illuminated Interchangeable Graphics Dual ice dispenser points Front serviceability Variable ice agitation is standard Adjustable ice dispense rate Push and Lever ice dispensing versatility Stainless steel construction Multiple non-carbonated drink capabilities Low ice sensing is standard with visual indicator Smooth and even ice dispensing flow 360 lbs. ice capacity with 300 lbs dispensable	Weight: Shipping approximately 460 lbs (206 kg), Counter without ice 400 lbs (181 kg) Total ice capacity : 360 lbs (163 kg) 115V electrical system (230V 50/60 Hz available) Key lock switch for dispensing valves 3-2-1-1-2-3 Flex Manifold Configuration Soda & Syrup Fittings: 3/8" male barb Unit can supply drinks under 40░F at rated draw performance continuously as long as ice is kept on cold plate.

Model Number	Product Features	Product Specifications
2200 HI 2200 STD	Available with 5 or 6 valves in post-mix and pre-mix versions 60 lbs. ice capacity Stainless steel construction with sealed-in high performance cold plate 3/4" drain with strainer to prevent ice blockage Stainless steel flooded soda manifold and multiple plain water configurations Ice bin and tower manifold insulated with CFC free structural foam Tower designed with removable splash plate for easy access to components Optional top merchandiser and back marquee feature lighted graphics for maximum impact and splash guards	15 in (381 mm) wide X 23 in (584 mm) deep X 33.375 in (848 mm) high 24VAC electrical system supplied using 115V transformer provided with dispenser (220V, 50/60Hz available) Space Required - Counter cut out for 15x23 is 15 1/4" x 23 1/4"(387 mm x 591 mm) Shipping Weight approximately 145 lbs (65.77 kg) Syrup and soda inlet: 3/8" male barb Key Lock Switch Valves LEV« Standard Manifold Configurations - 5 Valve 3-1-1, 6 Valves 3-2-1
2306 HI 2308 STD	Available with 8 valves in post-mix 100 lbs. ice capacity Stainless steel construction with sealed-in cold plate 3/4" drain with strainer to prevent ice blockage Stainless steel flooded soda manifold and multiple plain water configurations Ice bin and tower manifold insulated with CFC free structural foam Tower designed with removable splash plate for easy access to components Lighted graphics for maximum impact Dispenser can accommodate any number of non-carbonated drinks Optional top merchandiser and back marquee feature and splash guards	23 in (584 mm) wide X 23 in (584 mm) deep X 36.25 in (921 mm) high 24VAC electrical system supplied using 115V transformer provided with dispenser (220V, 50/60Hz available) Space Required - Counter cut out for 23x23 is 23 1/4" x 23 1/4"(591 mm x 591 mm) Shipping Weight approximately 260 lbs (118 kg) Ice Capacity: 100 lbs (45 kg) Syrup and Soda inlet: 3/8" male barb Key Lock Switch Valves LEV Standard Manifold Configurations - Standard Performance Soft Plumb: 8 Valve 5-2-1
2306 SBR HI 2306 STD	Available with 5 or 6 valves 100 lbs. ice capacity Stainless steel construction with sealed-in high performance cold plate 3/4ö Drain with strainer to prevent ice blockage Modular plug-in tower offers multiple plain water configurations Ice bin and tower manifold insulated with CFC free structural foam Dispenser can accommodate any number of non-carbonated drinks Tower designed with removable splash plate for easy access to components Sliding bin lid with electric interlock	23 in (584 mm) wide X 23 in (584 mm) deep X 36.25 in (921 mm) high 24VAC electrical system supplied using 115V transformer provided with dispenser (220V, 50/60Hz available) Space Required - Counter cut out for 23 x 23 is 23 1/4ö x 23 1/4 (591 mm x 591 mm) Shipping Weight Approximately 260 lbs (118 kg) Ice Capacity 100 lbs (45 kg) Syrup and soda inlet: 3/8" male barb Key Lock Switch Valves LEV Manifold Configurations High Performance Plug-In: 5 Valve 2-2-1, 6 Valve 3-2-1
23308	Available with 8 valves 130 lbs. ice capacity Stainless steel construction with sealed-in cold plate 3/4" drain with strainer to prevent ice blockage Multiple plug-in tower manifold offers multiple plain water configurations Ice bin and tower manifold insulated with CFC free structural foam Tower designed with removable splash plate for easy access to components Sliding bin lid with electric interlock Optional top merchandiser, back marquee feature (lighted graphics for maximum impact) and splash guards	30 in (762 mm) wide X 23 in (584 mm) deep X 35.25 in (895 mm) high 24VAC electrical system supplied using 115V transformer provided with dispenser (220V, 50/60Hz available) Space Required - Counter cut out for 30x23 is 30 1/4" x 23 1/4" (768 mm x 591 mm) Shipping Weight Approximately 275 lbs (125 kg) Ice Capacity 130 lbs (59 kg) Syrup and soda inlet: 3/8" male barb Key Lock Switch Valves LEV, other valves available upon request Manifold Configurations - 8 Valve 3-1-1-3
2400	Available with 5, 6 or 8 valves in post-mix (high performance) and pre-mix versions 100 lbs. ice capacity Stainless steel construction with sealed-in cold plate 3/4" drain with strainer to prevent ice blockage Flex manifold configuration for multiple non-carbonated drinks Ice bin and tower manifold insulated with CFC free structural foam Cabinet supplied with 6" leg kit or optional casters Optional top merchandiser, back marquee feature (lighted graphics for maximum impact) and splash guards	23 in (584 mm) wide X 23.75 in (603 mm) deep X 54.203 in (1377 mm) high 24VAC electrical system supplied using 115V transformer provided with dispenser (220V, 50/60Hz available) Space Required - Counter cut out for 23x23.75 is 23 1/4" x 24" (590.5 mm x 603 mm) Shipping Weight Approximately 265 lbs (120 kg) Ice Capacity 100 lbs (45 kg) Syrup and soda inlet: 3/8" male barb Key Lock Switch on post-mix dispensers Valves Fast-Flow LEV, other valves available upon request Manifold Configurations - Higher performance plug-in 5 Valve 2-2-1, 6 Valve 3-2-1, 8 Valve3-1-1-3
400	One inch molded Polyurethane structural insulation on all sides and bottom NSF approved sliding lids Available with or without sealed-in cold plate for post-mix All Stainless Steel construction Chests with 8 circuit cold plate have 1/2" drain 21" x 23" available with sealed-in cold plate; 9 circuit post-mix 15" x 22" available with sealed-in cold plate; 8 circuit post-mix Optional All models are available with leg stand for mounting	15" X 22" - 22 in (559 mm) wide X 15 in (381 mm) deep X 14.25 in (362 mm) high 21" x 23" - 23 in (584 mm) wide X 15in (381 mm) deep X 14.25 in (362 mm) high Space Required - Counter cut out should be 1/4" (6.35 mm) larger than dimensions Ice Bins - Standard 14 in depth 15" x 22" - 60 lbs (27.22 kg) 21" x 23" - 80 lbs (36.29 kg)

Model Number	Product Features	Product Specifications
Escort III	Compatible with Minute-Pak packages Lift out concentrate tanks, push-button automatic flushing and pre-set ratio control allow product changes in less than five minutes Steel frame, electrostatic painted, stainless steel exterior, all solid state quick connect electrical components Sold out sensor - concentrate level alarms signals product out with audio tone and light Occupies a small area of counter space and provides the highest refrigeration capacity in the industry Designed for ease of service and maintenance by field personnel (all components are "quick change" with a minimum of tools needed) Engineered for reliability, all components have been in field use in similar applications for many years	14 1/16 in (357mm) wide X 23 1/8 in (587 mm) deep X 26 1/2 in (673 mm) high 120 VAC, 60Hz, 7.0 A Solid state circuitry Space Required - 14 1/16" x 26 1/2" (357 mm x 673 mm) Weight: Shipping Approximately 152 lbs (69 kg), Counter With Water 180 lbs (82 kg)
1500	1/3 Hp, 30 lb ice bank Ideal for medium to high volume accounts Stainless steel cabinet, product lines and splash plate Available with 5 or 6 dispensing valves. All valves can be serviced independently Adaptable for bag-in-box or transfer tanks Available with chilled syrup coils or unchilled syrup lines for high viscosity concentrates Insulation is CFC-Free structural foam CFC-Free R134A refrigerant Chilled Juice graphic decals and white bonnet are standard Optional lighted marquee kit and leg kit	19 3/16 in (487 mm) wide X 24 in (610 mm) deep X 25 3/8 in (645 mm) high 115V, 60Hz, 7.8 A Optional 230V, 50Hz, single phase, 4.4A Weight: Shipping Approximately 150 lbs (68 kg), Counter With Water 261 lbs (118 kg)
500	1/4 Hp, 17 lb ice bank, flooded manifold Occupies a small area of counter space, only 10 3/8" wide. Compare with conventional dispenser All valves can be serviced independently Insulation is CFC-Free structural foam Adaptable for bag-in-box or transfer tanks Stainless steel exterior, water bath, product lines and drip tray assembly Removable refrigeration deck. All installation from front of unit. Adaptable for Bag-In-Box or transfer tanks CFC-Free R134A refrigerant Chilled Juice graphic decals and white bonnet are standard Leg kit included Optional lighted marquee kit	10.375 in (264 mm) wide X 25.25 in (641 mm) deep X 27.5 in (699 mm) high 115V, 60Hz, 7.0 A UL grounded cord and plug Weight: Shipping Approximately 108 lbs (49 kg), Counter With Water 145 lbs (66 kg)
Slimline	Compatible with Minute-Pak« packages Only 9 1/8" (232 mm) wide, provides high refrigeration capacity Steel frame, electrostatic painted, stainless steel exterior, all solid state quick connect electrical components Lift out concentrate tanks, push-button automatic flushing Sold out sensor - concentrate level alarms signals product out with audio tone and light Designed for ease of service and maintenance by field personnel (all components are "quick change" with a minimum of tools needed) Engineered for reliability, all components have been in field use in similar applications for many years	9 1/8 in (232 mm) wide X 24 9/32 in (617 mm) deep X 27 3/4 in (705 mm) high 120 VAC, 60Hz, 5.0 A Solid state circuitry 9 1/8" x 24 9/32" (232 mm x 617 mm) Weight: Shipping Approximately 106 lbs (48 kg), Counter With Water 122 lbs (55 kg)

Model Number	Product Features
Convertible Towers	Bubbling glass tower Unique attention-getting design Life-like drink presence Six post-mix dispensing valves Multiple non-carb capability Illuminated Maxi crown tower Bold crown design Superior graphics Six post-mix dispensing valves Flexible manifold Island base or drop-in configuration Double red head tower Bright stylized design Illuminated merchandising Island base or drop-in Configuration Six post-mix dispensing valves Multiple non-carb capability New ceramic tower The new look of ceramic towers Elegance in a cost effective design Multiple non-carb capability Six post-mix dispensing valves Island base or drop-in configuration
Pacific Tower	Pacific Tower Island base dispenser Stainless steel structure with attractive cosmetic cladding Designed for easy installation Six LEV« valves standard Lighted merchandiser standard Pacific Tower with Ice Bin 23x23 Drop-in ice bin with coldplate Conversion stand (optional) converts 23x23 drop-in to free standing unit Ice capacity 100 lbs (45 kg) Durable stainless steel cabinet Sealed-in cold plate
Tower 300	18", 23", 7" Single And Two Valve Island Based Towers Island base dispensing towers Stainless steel construction Designed for easy installation Optional merchandiser and marquee available on the 18" and 23" towers

Mark Powers & Company, Inc.
P.O. Box 72 • 1821 Henry Street • Guntersville, AL 35976
Phone: (800) 633-2256 Fax: (800) 216-6606